Entertainment
Get a Quote

TNER Krewmate Entertainment Electric Chain Hoist

Trusted when the show must go on.

Image of Kito's TNER Krewmate three phase entertainment electric chain hoist

While other show motors are out of commission for brake service or regular repair, Kito's TNER Krewmate theatre hoist is ready when duty calls. That's because the TNER Krewmate is built using the latest technology powered by innovative design and manufacturing processes, and backed up by outstanding customer support when you need it.

  • 220 Volts
  • 440 Volts
Image of Kito's electric pull-rotor brake

Self-Adjusting Pull-Rotor Motor Brake

This is the world’s most reliable theatrical hoist brake –– it even comes with a ten-year
warranty. Its simple design has no brake coil to fail or discs to replace, which keeps this hoist working longer with less maintenance.

Unique Chain Guide and Quiet Load Sheave

The guide’s durable, heavy cast iron construction gives it improved wear as the chain is quietly and smoothly guided where it needs to go. There’s less vibration and truer vertical lift.

Image of ergonomic easy lift handles on Kito's TNER Krewmate electric entertainment hoist

Ergonomic, Easy Lift Handles

Two convenient handles give you a comfortable and confident grip every time you pack or unpack your motors.

Image of plug and play voltage changer on Kito's TNER Krewmate electric entertainment hoist

Plug and Play Voltage Changer

You can change on the fly between 220/440V, which saves you valuable time during setup and integration. It’s as simple as plug and play.

Image of grease packed gears

Non-drip, Grease-Packed Gearbox

For demanding theatrical applications, this maintenance free feature is a welcome touch.

Image of friction clutch

Standard Overload Protection

Carbon friction material gives the TNER Krewmate consistent performance even in a wide range of temperatures. The friction clutch on the TNER Krewmate also protects the hoist from damage and prevents overwinding.

CAPACITY
  • ½ – 2 tonnes
STANDARDS
  • Standard lifts at 10 or 60 feet.
  • Hoist must be purchased with chain container
  • 1 year warranty (from defects in material and workmanship)
RATINGS/CLASSIFICATIONS
  • Complies with German regulation BGV-D8
  • Meets CE declaration
  • ASME H3
  • JS/ISO M3
  • FEM 1Bm
  • Hoist — IP55
  • Optional pendant — NEMA 4X,
OPTIONS
  • Black pendant (Pickle)
  • Pendant and power supply cord (longer lengths available)
  • 7 pin socapex connector
  • Flight/road case for easy transportation and hoist storage
  • Black load chain for low visibility
  • Bullard® hooks
BODY
  • Sleek rounded body with rugged aluminum housing and no sharp edges
  • Built-in, flexible handles for effortless packing and unpacking
  • Body size is designed to fit standard road cases
GEARS
  • Grease-Packed Gearbox for demanding theatrical applications
  • Maintenance free. No oil changes required
LOAD CHAIN
  • Nickel-plated load chain meets DIN and EN 818-7 standards.
  • Optional black chain available for low visibility
  • Reversible black canvas chain container needed to meet BGV-D8 regulations with with two secure attachment points
  • Standard Lift 60’ (other lengths available)
CHAIN GUIDE
  • Extremely durable, heavy-duty cast iron construction, with rounded outer edge for chain to spill easily over and into the chain bag
  • Easily replaced without disassembling hoist
HOOKS
  • Forged carbon steel opens gradually without fracturing under excessive loads.
  • Both top and bottom hooks swivel 360 degrees
  • Self-closing top and bottom hooks with heavy-duty hook latch
  • Ball bearings for smooth rotation
CONTROLS
  • Standard offering - double pigtail configuration for use with own hoist connectors
  • Single pigtail configuration - 7 pin conductors to supply hoist with power and to control hoist operation
  • 7-pin socapex - for use with a multi-hoist controller
  • Pickle (pendant) with power cord pigtail - similar to the standard used for industrial hoists
BRAKE
  • 10 year warranty
  • Pull-rotor motor brake: the world’s most reliable theatrical hoist brake
  • Simple design: no brake coil to fail or brake disc to replace
MOTOR
  • ½ and 1 tonne—16 fpm; 2 tonne—8 fpm
  • H3 classification with 30 minute duty rated motor
  • Standard voltage: 220/440V
  • Three phase, 60 hertz
  • Control voltage - 110V
OVERLOAD PROTECTION
  • Friction clutch located in the gearbox between motor and load gear prevents damage to hoist in the event of excessive overloading
OVERTRAVEL PROTECTION
  • Low profile upper/lower limit switches need no adjustment. Protects hoist and allows for maximum travel
Choose product configuration below to view info:
Hook Mount

TNER - Hook Mount

Dimensions

Product Code Minimum Headroom C (in) L* (ft) a (in) b (in) d (in) e (in) g (in) h (in) i (in) D (in)
TNER005L 13.2 2.5 18.7 14.2 9.6 9.2 0.9 3.9 4.0 35.4
TNER010L 16.1 2.5 20.0 15.0 10.2 9.8 1.2 4.1 4.7 37.0
TNER020L 22.8 2.5 20.0 15.0 10.2 9.8 1.6 4.1 4.7 48.8
TNER010S 16.1 2.5 20.0 15.0 8.8 11.2 1.2 4.1 4.7 37.0
TNER020S 22.8 2.5 20.0 15.0 8.8 11.2 1.5 4.1 4.7 48.8
* Standard length of control and power cables unless otherwise specified.
Hook Dimensions:
Capacity Code Hook a b c d e g
005L C 1.1 0.7 0.9 0.7 1.4 0.9
005L B 1.0 0.6 0.9 0.6 1.7 1.1
010L/S C 1.4 0.9 1.2 0.9 1.7 1.2
010L/S B 1.2 0.8 1.0 0.8 1.9 1.3
020L/S C 1.9 1.1 1.6 1.1 2.0 1.5
020L/S B 1.6 1.0 1.3 1.0 2.1 1.6

C = Chain Hook B = Body Hook Units. Please confirm specifications with technical support before purchase.

Specifications

Capacity (tonne) Model Lifting Speed (ft/min) Output (HP) Motor Load Chain Wire Diameter (mm) x Chain Fall Lines Load Sheave Pockets Net Weight With 60 Feet of Lift (lbs) Weight for One Additional FT.of Lift (lbs)
Current Draw (amps)
220V or 440V 460V
1/2 t TNER005L 16 0.65 3.7 1.8 6.3 x 1 4 99 0.57
1 t TNER010L 16 1.3 5.6 2.8 8.0 x 1 4 135 0.93
2 t TNER020L 8 1.3 5.6 2.8 8.0 x 2 4 209 1.9
1 t TNER010S 32 2.4 10.4 5.2 8.0 x 1 4 0 0.93
2 t TNER020S 16 2.4 10.4 5.2 8.0 x 2 4 225 1.9

Documents